1.1.2. Setup Device
Connect your device via USB. Click on the gear in the
upper-right corner and then click security. Turn on development mode
(see Figure 20). Now go
back to the home screen and click the little person icon to read your
IP address (see Figure 21).
Once you have your IP address, complete the Add BlackBerry
Tablet OS Test Device setup. Be sure to check the box that says Create
a debug token and upload it to this device (see Figure 22). Once you say
OK, you’re prompted to set the device to accept the debug token. Figure 23 shows the warning dialog;
Figure 24 shows the device
waiting for the debug token; Figure 25
shows that the debug token has been added; and Figure 26 shows the debug token
installed on the device.
Once this completes, you're ready to move on to Section 1.1.3, where you will
set the author and author ID.
